Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the Hyundai Ix20

Model: Hyundai ix20 OJ - Years 2010-2019
Part: Door trim panel

To remove the door panel of the Hyundai Ix20, take off the cap on the right side of the door and undo the screw with a cross-head screwdriver. Remove the cover behind the door handle and undo the screw with a cross-head screwdriver. Pry off the triangular cover behind the mirror using a plastic tool. Remove the cover in the handle to undo the last screw with a cross-head screwdriver. Using a plastic tool, insert it into a gap at the bottom and lever to detach the panel from the gap all around. Once the panel is detached from the buttons, pull it slightly upwards. To completely remove the panel, disconnect the window regulator connector and detach the cord from the door handle. Once the cord and connector are removed, you can take off the panel. To refit the panel, follow the reverse procedure of disassembly.

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Steering Wheel Airbag of the Hyundai Ix20
How to Remove the Steering Wheel Airbag of the Hyundai Ix20
Hyundai ix20 (2010-2019 / OJ) To replace the steering wheel airbag of the Hyundai Ix20, insert a screwdriver into the housing located at the central rear of the steering wheel. On…
Replacing Rear Bulbs on a Hyundai Ix20
Replacing Rear Bulbs on a Hyundai Ix20
Hyundai ix20 (2010-2019 / OJ) Let's look at replacing the damaged bulbs in the rear light of the Ix20. Open the tailgate to access the rear light, unscrew the securing screws on e…
How to replace the air filter of the Hyundai IX20
How to replace the air filter of the Hyundai IX20
Hyundai ix20 (2010-2019 / OJ) The replacement of the air filter of the Hyundai IX20 follows easily executable steps. The filter we will insert is a JFAK22A2320. The first step is …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos