Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Key Battery on the Hyundai Palisade

Model: Hyundai Palisade LX2, MK 1 - Years 2019-2026
Part: Key

If you need to replace the remote key battery because it is dead, the description below provides all the information and steps needed for a proper replacement. The first step is to extract the emergency key from its housing. Then, take a screwdriver to pry open the part in the emergency key slot and detach the rear cover. Underneath, you will find the battery that you can remove and replace with a new one. After that, close the cover and reinsert the emergency key.

Updated on 25 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery in a Hyundai Palisade
How to Replace the Key Battery in a Hyundai Palisade
Hyundai Palisade (2019-2026 / LX2, MK 1) In today's video, we will see the entire procedure needed to replace the battery (CR2032) in a Hyundai Palisade key, produced from 2019 onwards. Let’…
How to Reset the Service Light on a Hyundai Palisade?
How to Reset the Service Light on a Hyundai Palisade?
Hyundai Palisade (2019-2026 / LX2, MK 1) In this tutorial, you will see how to reset the service light on a Hyundai Palisade, a very simple and quick operation to perform only after completi…
Battery replacement for Hyundai Palisade
Battery replacement for Hyundai Palisade
Hyundai Palisade (2019-2026 / LX2, MK 1) These short and simple instructions will allow us to disassemble and replace the battery of the Hyundai Palisade vehicle. First, we open the hood of …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos