Do it yourself
Frequently asked questions about cars and motorcycles

How the TPMS Works on Hyundai Vehicles

Model: Hyundai Hyundai Various
Part: Tire pressure warning light

In this video, we see how the TPMS works on Hyundai vehicles: it is designed to keep you informed about the pressure in your tyres, which can be displayed on the vehicle's display. On some models, the tyre pressure screen can be found by scrolling through the modes on the LCD display, or as a submenu in the driver assistance screen. Some models display the individual pressures of each tyre, but only after a few minutes of driving. If the system detects a significantly deflated tyre, it will alert you by illuminating the warning light and displaying the tyre and the pressure it is currently registering. In this case, reduce speed and anticipate braking; stop as soon as possible and inflate it to the correct pressure. If you decide to install the spare wheel, remember that it does not have pressure sensors, so the light will remain on until the normal tyre is reinstalled. If the TPMS light comes on abnormally, have it checked at a Hyundai dealer. To change the TPMS settings, go to settings/general/unit/tyre pressure. This way, you can change the unit of measurement from PSI to Bar or vice versa.

Updated on 13 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Hyundai Hyundai Various In this video we can see how to check the tire pressure on most Hyundai vehicles: first of all, we take as reference the pressure indicated on the pl…
Hyundai Hyundai Various Many vehicles produced by Hyundai can reset the tire pressure warning light using the button located under the left dashboard. When the light comes o…
Hyundai Hyundai Various Hyundai vehicles have easy access to deactivating the passenger side airbag. In fact, on this type of vehicle, to deactivate the airbag, we simply ne…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos