Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Spare Wheel on a Hyundai Car

Model: Hyundai Hyundai Various
Part: Wheel

Video tutorial

This video shows how to replace the spare wheel on a Hyundai car. Some vehicles come with a mobility kit, while others have a spare wheel. For the latter, park on a flat surface, engage the handbrake, turn off the vehicle, and switch on the hazard lights.

Remove the wheel and accessories from the boot, block the opposite diagonal wheel, then loosen the wheel nuts by one turn as shown in the video. Position the jack close to the tyre being changed and lift the wheel off the ground.

Remove the nuts and take off the wheel. Fit the spare wheel by installing the nuts, lower the vehicle, and tighten the nuts in the reverse order to how they were loosened.

Store the tyre and jack back in the boot. The spare wheel has different speed limits than normal tyres and should only be used to reach the nearest tyre shop to replace the punctured tyre.


Updated on 21 October 2026 by ScegliAuto


Related tutorials

How to Update the Maps of a Hyundai Sat Nav?
How to Update the Maps of a Hyundai Sat Nav?
Hyundai Hyundai Various In this tutorial, you will see how to update the maps of a Hyundai sat nav, a very simple and quick operation. To do this, you will need a USB key wi…
How to Set the Clock on Hyundai Vehicles?
How to Set the Clock on Hyundai Vehicles?
Hyundai Hyundai Various To set the clock in Hyundai vehicles, turn on the central display, press where the time is displayed, and a screen will appear with a tick next to "g…
How to Set the Time on a Hyundai Vehicle
How to Set the Time on a Hyundai Vehicle
Hyundai Hyundai Various Setting the time on a new generation Hyundai is very simple as it is done through the infotainment system. This operation takes only a few minutes. A…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos