Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on a Hyundai i10

Model: Hyundai I10 IA, MK 2 - Years 2013-2020
Part: Headlight bulb

In this new mini guide dedicated to your Hyundai i10 second series (2013-2020), discover how to quickly and safely replace the front headlight bulb. Before starting, remember that this operation must be performed with the car completely off and parked on a flat surface. Once you have taken these precautions, lift the car with a suitable jack and remove the plastic panel located in the lower area of the engine compartment. At this point, disconnect the electrical pin and remove the faulty bulb. Finally, fit the new one.

Updated on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the Hyundai I10.
How to replace the headlight bulb of the Hyundai I10.
Hyundai I10 (2007-2013 / PA, MK 1) Below are the instructions on how to disassemble and replace the headlight bulb of the Hyundai I10. First, open the hood of the car and start by remo…
How to Replace the Front Fog Light Bulb on a 2013 Hyundai I10
How to Replace the Front Fog Light Bulb on a 2013 Hyundai I10
Hyundai I10 (2013-2020 / IA, MK 2) Replacing the left fog light bulb on a Hyundai I10 involves a few simple steps that you can carry out independently. To replace the bulb, you need to…
How to replace the bulb in the Hyundai I10 headlight
How to replace the bulb in the Hyundai I10 headlight
Hyundai I10 (2013-2020 / IA, MK 2) Replacing the front headlight bulb of the Hyundai I10 is a simple and quick operation to be carried out independently. The steps to follow are: - ope…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos