Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. Santa Fe
  6. : Resetting the service light of the Hyundai Santa Fe.

Hyundai Santa Fe - Video tutorial

Model: Hyundai Santa Fe MK 3 - Years 2012-2018
Part: Checks and maintenance
Operation: Resetting the service light of the Hyundai Santa Fe.

Through these instructions, we will see how to reset the maintenance light for the regular oil change of the Hyundai Santa Fe. First, we get inside the car and turn on the instrument panel. Then, we press the menu button on the steering wheel to scroll through the options on the instrument panel display until we reach the service option, as shown in the video. At this point, we hold down the reset button to reset the service light and the remaining mileage before the next service. We verify the successful reset of the light (repeat the process if necessary).


Posted on 18 October 2023 by ScegliAuto



How do you reset the Service light on the Hyundai Santa Fe?
Hyundai Santa Fe (2019-2024 / MK 4, TM) The operation of resetting the Service light on the Hyundai Santa Fe is done by turning on the instrument panel and then pressing the MENU button loc
How to reset the oil light on the Hyundai Santa Fe.
Hyundai Santa Fe (2012-2018 / MK 3) Resetting the oil service light on a 2018 Hyundai Santa Fe, after replacing the filter and changing or topping up the oil, is a very simple operation
How to reset the oil service in the Hyundai Santa Fe?
Hyundai Santa Fe (2012-2018 / MK 3) Resetting the oil service in the Hyundai Santa Fe is a very simple and quick operation, let's see how to proceed in this tutorial. Before doing this,

    Frequently Asked Questions

    • Santa Fe 2006-2012 - What to do if the handbrake of Hyundai Santa Fe 2 is not working? Read Answer
    • Santa Fe 2000-2006 - Where is the jack on the Hyundai Santa Fe? Read Answer
    • Santa Fe 2012-2018 - What are the spies of the Hyundai Santa Fe? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos