Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuel Pump Replacement Instructions

Model: Hyundai Sonata - Years 2004-2014
Part: Pump

If the engine does not start, one probable cause is that fuel is not reaching the engine due to a failure in the low-pressure pump submerged in the tank, which also integrates the float. It is possible to replace just the pump, but it is necessary to remove the entire assembly with the float, located at the front of the boot, just behind the backrest of the passenger seat. Once the cover is removed and the connectors and pipes are disconnected, unscrew the pump retaining ring to extract it and proceed with the replacement of the pump element.

Updated on 21 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Open a Stuck Fuel Door on a Hyundai Sonata?
How to Open a Stuck Fuel Door on a Hyundai Sonata?
Hyundai Sonata (2010-2015 / YF, MK 6) In a Hyundai Sonata, it may happen that the fuel door gets stuck, for example, due to a fault in the control button or the lock actuator. In such cas…
Radiator Replacement Instructions
Radiator Replacement Instructions
Hyundai Sonata (1998-2005 / EF) It is recommended to perform this repair with the engine cold as it will be necessary to drain the coolant. If you have a pump, you can pressurise th…
Timing Belt Replacement
Timing Belt Replacement
Hyundai Sonata (1998-2005 / EF) Lift the vehicle on a hydraulic ramp, remove the front right wheel (passenger side), and take off the wheel arch cover to access the pulleys. Loosen …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos