|
Do it yourself
| |||
| ||||
Radiator Replacement Instructions
Model: Hyundai Sonata
EF
- Years:
1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Video tutorial
It is recommended to perform this repair with the engine cold as it will be necessary to drain the coolant. If you have a pump, you can pressurise the cooling circuit to check for actual leaks from the radiator elements. Once you confirm that the radiator needs replacing, proceed with the disassembly. Lift the vehicle on a ramp and remove the plastic cover under the radiator; remove the drain plug and drain the coolant from the radiator; disconnect the battery as a precaution to avoid damaging the electric fans, and disconnect the relevant power connector; disconnect the hoses and then unscrew the radiator mounting bolts from the crossmember. At this point, you can remove the radiator complete with electric fans, and once on the bench, you will need to transfer the fan assembly to the new radiator, then proceed in reverse for installation. At the end of the installation, refill the cooling circuit with the appropriate coolant.
Updated on 13 February 2026 by ScegliAuto
Related tutorials
Hyundai Sonata
(2004-2014 /
)
It is recommended to perform this maintenance with the engine cold to avoid unpleasant burns; start by removing the air intake duct located directly …
Hyundai Sonata
(2010-2015 /
MK 6, YF)
In this video, we can see how to replace the radiator of the Hyundai Sonata YF, specifically the one produced from 2010 to 2015. First, we need to re…
Hyundai Sonata
(2010-2015 /
MK 6, YF)
If the radiator fan in your Hyundai Sonata has suddenly stopped working, first check the status of the relevant fuse, as shown in this video. As demo…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.063
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
