|
Do it yourself
| |||
| ||||
How to replace the radiator of the Hyundai Sonata YF
Model: Hyundai Sonata
MK 6, YF
- Years:
2010, 2011, 2012, 2013, 2014, 2015
Video tutorial
In this video, we can see how to replace the radiator of the Hyundai Sonata YF, specifically the one produced from 2010 to 2015. First, we need to remove the radiator fan, otherwise it will be impossible to access the component. So first, we need to disconnect the car's battery to prevent the fan from turning on and hurting our fingers. Remember to always disconnect the negative pole first. We then remove the air duct; we will then remove the radiator hose to which its electrical wires are connected: we remove the plug and set everything aside. The same must be done on the other side. We remove the entire apparatus and now we have access to the radiator. Now we need to drain the cooling system, so we will remove the clamp holding the hose and then disconnect the connection at the bottom, where we will place a container to collect the fluid circulating in the system. We loosen the caps of the transmission lines connecting the radiator to the system and then unscrew the screws connecting it to the body, on the front of the hood. If we are sure there is no pressure in the system, then we can remove the radiator, being very careful to remove the sealing clips that are still along the component.
Posted on 10 March 2025 by ScegliAuto
Related tutorials
Hyundai Sonata
(2010-2015 /
MK 6, YF)
In this brief guide, we will see the instructions to remove and replace the radiator fan of a Hyundai Sonata. First, open the bonnet of the vehicle a…
Hyundai Sonata
(2010-2015 /
MK 6, YF)
If the radiator fan in your Hyundai Sonata has suddenly stopped working, first check the status of the relevant fuse, as shown in this video. As demo…
Hyundai Sonata
(2015-2019 /
LF)
To replace the small button battery inside the remote of your Hyundai Sonata Hybrid, simply follow the steps described in this guide. First, take the…
Other guides you may be interested in
|
How to Reset the Tire Pressure Light on a MG ZS?
On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.077
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |