Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bonnet of Your Car

Model: Hyundai Sonata - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Body

See other generations:
Video tutorial

To remove the bonnet safely, at least two people are needed. In order, remove: the front side indicators, the front bumper, the front light units, and the front wing panel.

Once this is done, disconnect the washer hose and remove: the bonnet insulator, the seal of the separation panel between the engine compartment and the cabin, the bonnet, its hinge, and the support rod for the bonnet. The new bonnet should be installed in reverse order to that of removal and aligned properly.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Replacing the Front Headlamp
Replacing the Front Headlamp
Hyundai Sonata (2004-2014 / ) This guide shows how to replace the front headlamp of your car. The headlamp to be changed is attached to the bodywork with screws and connected to t…
We check the alternator fuse if the battery of our car is discharged.
We check the alternator fuse if the battery of our car is discharged.
Hyundai Sonata (2005-2010 / MK 5, NF) In this video, we see how to behave if the battery of our car suddenly runs out, or if the battery light comes on. The car in the video is a 2008 Hyu…
Removing and Replacing Brake Pads
Removing and Replacing Brake Pads
Hyundai Sonata (1998-2005 / EF) This video shows how to remove and replace the front brake pads on your car. First, lift the car with the help of a ramp or jack, then remove the fro…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos