Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Sonata
    4. : How to remove the front bumper on a Hyundai Sonata?

Hyundai Sonata - Video tutorial

Model: Hyundai Sonata MK 6, YF - Years 2010-2015
Part: Front bumper
Operation: How to remove the front bumper on a Hyundai Sonata?

In this tutorial, we can see how to remove the front bumper on the Hyundai Sonata, an extremely simple and fast operation. First of all, we open the hood, then we remove all the plastic rivets placed on the upper edge of the grille. We continue by removing the rivets placed underneath the vehicle, unscrewing the bolts accessible from the wheel arches using a 10mm socket wrench, and unscrewing the last indicated screws. At this point, we can grab the bumper from one of the two ends, pull it outwards, and separate it from the frame. To install the replacement, simply follow the reverse procedure.


Posted on 16 June 2023 by ScegliAuto



How to replace the front headlight of a Hyundai Sonata.
Hyundai Sonata (2015-2019 / LF) Today we will see the necessary guide to disassemble and replace the front headlight of the Hyundai Sonata, in simple and quick steps. First, we open
How to disassemble the front headlight of the Hyundai Sonata.
Hyundai Sonata (2010-2015 / MK 6, YF) Today's guide will show us how to disassemble and replace the front headlight of the Hyundai Sonata, following these simple steps. First, we open the
Where is the fuse box located in the 2016 Hyundai Sonata?
Hyundai Sonata (2015-2019 / LF) In the following guide, we will discover together where the box containing all the various fuses of your 2016 Hyundai Sonata is located. Before start

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos