Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Front Bumper

Model: Hyundai Sonata - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Front bumper

See other generations:
Video tutorial

Removing the front bumper is very simple and does not require disassembling any other components: it is essentially a cover, almost like a fairing, overlaid on the underlying impact bar. Start by unscrewing the screw that secures the edge of the bumper to the wing, then remove the one at the lower edge.

Take out the screws along the lower edge of the bumper and the clips that secure the upper trim to the slam panel (first unscrew the central expansion screw before removing the clip).

Finally, there are a couple more pins to unscrew, and the bumper can be removed.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Front Bumper
Instructions for Removing the Front Bumper
Hyundai Sonata (2004-2014 / ) To remove the front bumper, start by opening the bonnet to remove the clips along the closure edge that secure the plastic grille to the front panel;…
How to Remove the Front Bumper of the Hyundai Sonata?
How to Remove the Front Bumper of the Hyundai Sonata?
Hyundai Sonata (2010-2015 / MK 6, YF) You can remove the front bumper of the Hyundai Sonata by opening the bonnet to access the components at the top of the bumper: here, you can loosen t…
How to Remove the Front Bumper on the Hyundai Sonata?
How to Remove the Front Bumper on the Hyundai Sonata?
Hyundai Sonata (2010-2015 / MK 6, YF) In this tutorial, see how to remove the front bumper on the Hyundai Sonata, a very simple and quick operation. First, open the bonnet. Next, remove a…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos