Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Front Bumper

Model: Hyundai Sonata - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Front bumper

See other generations:
Video tutorial

To remove the front bumper, start by opening the bonnet to remove the clips along the closure edge that secure the plastic grille to the front panel; then move on to the mounting pins located near the headlights, just below the lower fascia, and under the wheel arches; at this point, unclip the anchor points under the wheel arches, taking care not to damage the reinforcing ribs (otherwise, the subsequent installation will be compromised) and complete the removal by disconnecting the power connectors for the fog lights.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Front Bumper
Instructions for Removing the Front Bumper
Hyundai Sonata (2004-2014 / ) Removing the front bumper is very simple and does not require disassembling any other components: it is essentially a cover, almost like a fairing, o…
Bumper Repair Instructions
Bumper Repair Instructions
Hyundai Sonata (2004-2014 / ) In the event of a breakage of a bumper piece (or any plastic element), you can use innovative repair techniques that involve special adhesives capabl…
Battery Removal Instructions
Battery Removal Instructions
Hyundai Sonata (2004-2014 / ) Removing the battery is extremely simple and does not require special precautions other than noting any activation codes, such as that for the car ra…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos