Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Sonata
    4. : How to disassemble the front headlight of the Hyundai Sonata.

Hyundai Sonata - Video tutorial

Model: Hyundai Sonata YF, MK 6 - Years 2010-2015
Part: Headlight
Operation: How to disassemble the front headlight of the Hyundai Sonata.

Today's guide will show us how to disassemble and replace the front headlight of the Hyundai Sonata, following these simple steps. First, we open the car's engine hood and start unscrewing the fastening screws found on the upper part of the front bumper, also removing the various clips. Then, we unscrew the screws located on both sides of the front wheel arches, using a 10mm socket wrench, as shown in the video. At this point, we unscrew the screws located under the front bumper to remove it. We unscrew the screws of the headlight assembly and disconnect the electrical connector of the lights to remove the front headlight!


Posted on 31 December 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos