Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radiator Fan from a Hyundai Sonata

Model: Hyundai Sonata MK 6, YF - Years: 2010, 2011, 2012, 2013, 2014, 2015

See other generations:
Video tutorial

In this brief guide, we will see the instructions to remove and replace the radiator fan of a Hyundai Sonata. First, open the bonnet of the vehicle and start by removing the air intake by unscrewing the upper fixing screws; then disconnect the electrical connector of the fan, unscrewing all the support screws, as shown in the video.

At this point, remove and replace the fan with a new one, as well as the original; reconnect the electrical connection and test the operation by bringing the engine up to temperature.


Posted on 6 March 2026 by ScegliAuto


Related tutorials

What is the fuse for the radiator fan in the Hyundai Sonata?
What is the fuse for the radiator fan in the Hyundai Sonata?
Hyundai Sonata (2010-2015 / MK 6, YF) If the radiator fan in your Hyundai Sonata has suddenly stopped working, first check the status of the relevant fuse, as shown in this video. As demo…
Instructions for Removing the Radiator Fan
Instructions for Removing the Radiator Fan
Hyundai Sonata (2004-2014 / ) It is recommended to perform this maintenance with the engine cold to avoid unpleasant burns; start by removing the air intake duct located directly …
Removing the Cabin Fan Resistor on Hyundai Sonata
Removing the Cabin Fan Resistor on Hyundai Sonata
Hyundai Sonata (2004-2014 / ) In this brief video, you will see how to remove the heating fan resistor from a Hyundai Sonata in simple steps. First, get inside the vehicle: you wi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos