Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Radiator Fan

Model: Hyundai Sonata - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Blower motor

See other generations:
Video tutorial

It is recommended to perform this maintenance with the engine cold to avoid unpleasant burns; start by removing the air intake duct located directly above the radiator (it is secured with three screws); the cooling fan is attached to a support frame connected to the radiator by lower clips and screws located at the top: unscrew the mounting screws, disconnect the power connector of the fan motor, and release the lower clips to extract the complete support frame with the fan.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Battery Removal Instructions
Battery Removal Instructions
Hyundai Sonata (2004-2014 / ) Removing the battery is extremely simple and does not require special precautions other than noting any activation codes, such as that for the car ra…
Instructions for Removing the Car Radio
Instructions for Removing the Car Radio
Hyundai Sonata (2004-2014 / ) To remove the original car radio from this vehicle, you will need to take off some dashboard elements to access the relevant fixing screws. Begin by …
Instructions for Removing the Rear Light
Instructions for Removing the Rear Light
Hyundai Sonata (2004-2014 / ) To remove the rear light, access the boot and remove the sound-absorbing cover that acts as a cap directly over the light housing; once the cover is …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos