Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Car Radio

Model: Hyundai Sonata - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Car stereo

See other generations:
Video tutorial

To remove the original car radio from this vehicle, you will need to take off some dashboard elements to access the relevant fixing screws. Begin by removing the central trim piece of the dashboard by unscrewing the screws located inside the closure line of the glove compartment door.

Once this trim is removed, you can unscrew the fixing screws of the two buttons located on either side of the radio and finally unscrew those of the radio itself to extract it from its housing by disconnecting the connectors.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Car Radio
Instructions for Removing the Car Radio
Hyundai Sonata (2004-2014 / ) The first operation is to remove the central dashboard trim: note that it is not only clipped in but there is also a securing screw at the top inner …
Instructions for Removing the Rear Light
Instructions for Removing the Rear Light
Hyundai Sonata (2004-2014 / ) To remove the rear light, access the boot and remove the sound-absorbing cover that acts as a cap directly over the light housing; once the cover is …
Radiator Replacement Instructions
Radiator Replacement Instructions
Hyundai Sonata (1998-2005 / EF) It is recommended to perform this repair with the engine cold as it will be necessary to drain the coolant. If you have a pump, you can pressurise th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos