Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Kona
    4. : How to reset the TPMS light on a 2017 Hyundai Kona?

Hyundai Kona - Video tutorial

Model: Hyundai Kona MK 1 - Years 2017-2023
Part: Checks and maintenance
Operation: How to reset the TPMS light on a 2017 Hyundai Kona?

To reset the TPMS (Tire Pressure Monitoring System) light on a 2017 Hyundai Kona, follow these steps: - Turn on the ignition. - Press the Menu button on the steering wheel. - Select "Settings" by using the right arrow button. - Select "Reset". - Scroll through the new menu interface to select "Tire Pressure". - Hold down the Menu button for a few seconds. And there you have it, the TPMS light has been successfully reset. All that's left is to turn off the ignition and restart it. If the light comes back on, check the tire pressure before resetting again.


Posted on 9 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Hyundai Kona 2017-2023 - How much does the Hyundai Kona service cost? Read Answer
    • Hyundai Kona 2017-2023 - What does the warning light with a steering wheel and an exclamation mark in the Hyundai Kona mean? Read Answer
    • Hyundai Kona 2017-2023 - When to service the Hyundai Kona Hybrid? Read Answer
    • Hyundai Kona 2017-2023 - What are the spies of the Hyundai Kona? Read Answer
    • Hyundai Kona 2017-2023 - How many km do you have to carry out a service on the Hyundai Kona? Read Answer
    • Hyundai Kona 2017-2023 - What does the urea warning light inside the instrument cluster of a Hyundai Kona mean? Read Answer
    • Hyundai Kona 2017-2023 - How many km should the first service be performed on a Hyundai Kona? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos