Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Handbrake Adjustment on Hyundai ix35

Model: Hyundai ix35 MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Parking brake

Video tutorial

If the handbrake lever lifts significantly, that is, rises more than five or six clicks, you can adjust the activation cable so that it rises by three or four clicks; the adjustment is made from inside the cabin: you must remove the rear cover of the centre tunnel, behind the armrest, then remove a protective bracket to access the cable adjustment nut; gradually tighten the nut while checking the travel of the handbrake lever until the adjustment is complete.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

Replacing the External Wing Mirror on a Hyundai Ix35
Hyundai ix35 (2009-2015 / MK 1) To remove and subsequently replace the external wing mirror on a Hyundai Ix35, simply leverage it from behind with your hands, pulling it out of its …
How to reset the tyre light on the Hyundai IX35
How to reset the tyre light on the Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) Resetting the tyre light on your Hyundai IX35 is very simple, and the procedure to carry out the operation is truly within anyone's reach. Let's find…
How to Set the Time on the Hyundai IX35
How to Set the Time on the Hyundai IX35
Hyundai ix35 (2009-2015 / MK 1) Below are the instructions to adjust the time on the Hyundai IX35 by following these simple steps. First, get inside the vehicle and turn on the inst…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos