Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio in a 2019 Hyundai Tucson

Model: Hyundai Tucson MK 3, TL - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Car stereo

See other generations:
Video tutorial

Today, you will learn the steps to replace the radio in a 2019 Hyundai Tucson. The first step is to open the passenger door to remove the end cover of the dashboard using a plastic lever, then unscrew the three internal screws.

The second step is to remove the entire dashboard using a plastic tool to pry it off. The third step is to unscrew the four screws, two upper and two lower, securing the radio and remove it from its housing. The fourth step is to connect the connectors and wires to the new radio and insert it into the housing.

The fifth step is to reassemble the dashboard.


Updated on 20 September 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a Hyundai Tucson
How to Remove the Radio from a Hyundai Tucson
Hyundai Tucson (2004-2009 / JM, MK 1) Discover in this brief and simple guide how to remove and replace the standard radio of the Hyundai Tucson. First, get inside the vehicle and start b…
Removing the Radio from a Hyundai Tucson
Removing the Radio from a Hyundai Tucson
Hyundai Tucson (2004-2009 / JM, MK 1) Removing the radio from a Tucson? This operation is not too complex if done in order. Unscrew the securing screw of the knob and remove it. Remove th…
Where to Find the Fuse Box of the Hyundai Tucson
Where to Find the Fuse Box of the Hyundai Tucson
Hyundai Tucson (2004-2009 / JM, MK 1) To discover the location of the fuse box inside your first-generation Hyundai Tucson (2004-2009), follow these steps. First, park the vehicle safely …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos