Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. ix35
    4. : What is the fuse layout of the Hyundai IX35?

Hyundai ix35 - Video tutorial

Model: Hyundai ix35 MK 1 - Years 2009-2015
Part: Fuse box
Operation: What is the fuse layout of the Hyundai IX35?

In this video we can see where the fuse boxes of the Hyundai IX35 are located and what are the respective diagrams, to consult in case we need to check the fuses of a malfunctioning device. We find the first box inside the cabin, behind the small panel located in the lower left area of the dashboard, on the driver's side. The second box is instead located inside the engine compartment, protected by the plastic cover located just to the left of the battery. In case of faulty fuses, make sure to use replacements with equivalent specifications.


Posted on 15 April 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Ix35 2009-2015 - Where are the fuses located on the Hyundai Ix35? Read Answer
    • Ix35 2009-2015 - What is the radio fuse on the Hyundai Ix35? Read Answer
    • Ix35 2009-2015 - Where is the front light fuse on the Hyundai ix35? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos