Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the low beam headlight bulb of the Hyundai I20 K3.

Model: Hyundai I20 BC3, MK 3 - Years 2020-2026
Part: Headlight bulb

If the headlight bulb of the Hyundai I20 should burn out, we will replace it as soon as possible in order to drive safely and avoid fines. To do this, we open the hood of the engine compartment, stand in front of the headlight where the bulb is housed, unscrew the back cover of the headlight, disconnect the electrical connector. Release the metal clip and rotate it to the side, remove the old bulb and insert a new H4 bulb in its place, secure it with the metal clip, reconnect the electrical connector and replace the protective cover.

Posted on 3 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing Position Light Bulb on Hyundai I20
Replacing Position Light Bulb on Hyundai I20
Hyundai I20 (2008-2014 / MK 1, PB) Are the front headlight bulbs not working? Let's look at how to remove the bulbs from the I20 headlights. Lift the front bonnet and secure it, then r…
Replacing the Bulb on a Hyundai i20
Replacing the Bulb on a Hyundai i20
Hyundai I20 (2014-2021 / GB, IB, MK 2) Follow these steps for replacing the bulb on a Hyundai i20. Open the bonnet by pulling the lever located at the bottom right of the dashboard and sec…
Replacing Position Bulb on Hyundai I20
Replacing Position Bulb on Hyundai I20
Hyundai I20 (2008-2014 / MK 1, PB) Let's look at how to remove the position bulbs from the Hyundai I20 headlights. Lift the front bonnet and secure it, then remove the plastic cover th…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos