Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light on the Hyundai Veloster?

Model: Hyundai Veloster MK 1, FS - Years 2011-2018
Part: Tire pressure warning light

In order to reset the tire pressure light of the Hyundai Veloster, you first need to inflate all the tires to the recommended pressure value: this value is indicated on the sticker located on the driver's side door pillar. Once all the tires have been inflated, you can go inside the cabin and turn on the instrument panel: once turned on, give the sensors time to read the new pressure values. If the light does not turn off immediately, it will be necessary to drive for a few kilometers to facilitate the procedure.

Posted on 2 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Hyundai Veloster
How to Reset the Service Light on the Hyundai Veloster
Hyundai Veloster (2011-2018 / MK 1, FS) Below are the steps you need to follow if you intend to manually reset the service light on your first-generation Hyundai Veloster. First, get in the…
How to reset the service light on the 2019 Hyundai Veloster
How to reset the service light on the 2019 Hyundai Veloster
Hyundai Veloster (2019-2022 / JS, MK 2) In the following guide, we will discover the steps you need to take in order to independently reset the service light on the instrument panel of your…
How to reset the maintenance light on the Hyundai Veloster
How to reset the maintenance light on the Hyundai Veloster
Hyundai Veloster (2019-2022 / JS, MK 2) Below are the instructions that will allow us to reset the service light for the regular maintenance of the engine oil change on the Hyundai Veloster…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos