Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Mirror on an Infiniti Q50

Model: Infiniti Q50 V37, MK 1 - Years 2013-2024
Part: Side mirror

Before you start, open the front door of your Infiniti Q50. Begin by removing the door panel by unclipping and taking out the inserts, then unscrew the fixing screws, and finally unclip the door panel itself. Next, unclip and remove the cover located near the mirror. This will give you access to the nuts securing the mirror to the door, which you need to unscrew and remove. After this, disconnect the electrical connector. At this point, pull out and remove the external mirror, and you will have completed the removal. To fit the new mirror, simply reverse these instructions, and you will have completed the replacement.

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the external mirror on an Infiniti Q50?
Infiniti Q50 (2013-2024 / V37, MK 1) To replace the external mirror on an Infiniti Q50, you need to completely detach the door panel from its position: the screws securing the panel are …
Replacement of the turn signal light of the Infiniti Q50 mirror
Replacement of the turn signal light of the Infiniti Q50 mirror
Infiniti Q50 (2013-2024 / V37, MK 1) Today we will discover the instructions that will allow us to disassemble and replace the turn signal lights of the external rearview mirror of the I…
How to Replace the Air Filter in the Infiniti Q50
How to Replace the Air Filter in the Infiniti Q50
Infiniti Q50 (2013-2024 / V37, MK 1) Your Infiniti Q50 has two air filters in the engine bay that ensure better airflow to the engine, preserving its efficiency and reliability. Below, w…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos