Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Infiniti
    3. :
  3. QX60
    4. : How to replace the driver's side door mirror on your Infiniti Qx60

Infiniti QX60 - Video tutorial

Model: Infiniti QX60 L50 - Years 2013-2020
Part: Outside rearview mirror
Operation: How to replace the driver's side door mirror on your Infiniti Qx60

To replace the driver's side rear view mirror, with a small slotted screwdriver, remove the bolt cover behind the internal handle and unscrew the bolt with a 10 socket wrench; with the same small slotted screwdriver, remove the cap of the bolts where the armrest is located (the cap is the vertical one) and remove the 2 bolts with a 10 socket wrench; now we lever with our hands on the left side to detach the panel, then on the right one, removed from the joints, we lift it and move it without removing any cables; moved the panel, remove the rear plastic of the mirror by levering with your hands, then unscrew the 3 rear nuts of the mirror with a 10 socket wrench and disconnect the connector; having disconnected the connector and removed the nuts, we remove the external rear view mirror. Removed the old mirror, reposition the new mirror screwed the first nut, connect the connector and test the various functions of the mirror (opening/closing of the mirror/direction indicator/inclinations) and if the mirror works correctly we reassemble everything by carrying out the reverse procedure compared to disassembly.


Posted on 12 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos