Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Outside Rearview Mirror on the Infiniti QX60

Model: Infiniti QX60 L50 - Years 2013-2020
Part: Side mirror

To replace the outside rearview mirror on this vehicle model, find the information on how to proceed in the description below and in the video. First, you need a plastic trim tool to unclip the retaining clips of the door panel. Once the panel is removed, at the support triangle of the mirror, you will find the screws that need to be taken out to remove the mirror itself. Then, disconnect the electrical connectors before installing the new mirror and reassemble all components in reverse order.

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Driver's Side Mirror on an Infiniti QX60
How to Replace the Driver's Side Mirror on an Infiniti QX60
Infiniti QX60 (2013-2020 / L50) To replace the driver's side mirror, use a small flathead screwdriver to remove the bolt cover behind the internal handle and unscrew the bolt with a…
What is the fuse layout of the Infiniti QX60?
What is the fuse layout of the Infiniti QX60?
Infiniti QX60 (2013-2020 / L50) In this video we can see where the fuse boxes of the Infiniti QX60 are located and what their respective diagrams are, useful in case we need to chec…
How to Replace the Front Headlight Bulb of the Infiniti QX60?
How to Replace the Front Headlight Bulb of the Infiniti QX60?
Infiniti QX60 (2013-2020 / L50) To replace the front headlight bulb of the Infiniti QX60, open the hood to access the components at the back of the headlight. There will be a circul…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos