Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Indicator Bulb on the Iveco Daily

Model: IVECO Daily MK 4 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Side marker bulb

See other generations:
Video tutorial

If the indicator bulb on the external mirror of the Iveco Daily burns out, replace it as soon as possible to travel safely and avoid fines. Position yourself by the mirror containing the bulb to be replaced, gently use a plastic lever to remove the two mirrors, then use a Torx screwdriver to unscrew the two screws securing the side light and carefully remove it with a screwdriver.

With a slight rotation, remove the bulb holder, take out the burnt bulb, and replace it with a new one. Insert it back into its housing and secure it. Reassemble the various parts in reverse order.


Updated on 26 October 2026 by ScegliAuto


Related tutorials

How do you remove the bulb from the turn signal indicator of the external rearview mirror on the Iveco Daily?
How do you remove the bulb from the turn signal indicator of the external rearview mirror on the Iveco Daily?
IVECO Daily (2006-2020 / MK 4) The vehicle shown in the video is a Fiat Ducato, but since they are structurally very similar, we can consider this operational demonstration valid f…
How to Replace the Bulb in the Wing Mirror Indicator of an Iveco Daily
How to Replace the Bulb in the Wing Mirror Indicator of an Iveco Daily
IVECO Daily Here’s how to change the bulb in the indicator located on the external wing mirror of the Iveco Daily. Get a long shaft flat-head screwdriver. Move t…
How to Replace the Indicator Bulb on the Iveco Daily Mk5
How to Replace the Indicator Bulb on the Iveco Daily Mk5
IVECO Daily (2014-2026 / MK 5) This guide shows how to replace the direction indicators located on the wing mirrors of the Iveco Daily Mk5. The first step is to remove the two wing…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos