Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Iveco Daily?

Model: IVECO Daily MK 5 - Years 2014-2026
Part: Service warning light

The procedure for resetting the Service light on the Iveco Daily involves turning the key in the corresponding slot to turn on the instrument panel, without starting the engine: once the instrument panel is on, you will need to press the accelerator pedal and at the same time press the brake pedal eight times in a row. At this point, you can release both pedals and turn off the instrument panel for good; it can then be turned on again by turning the key, and in this way you can verify that the light has disappeared from the instrument panel.

Posted on 9 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Iveco Daily
How to reset the service light on the Iveco Daily
IVECO Daily (2014-2026 / MK 5) To reset the service light on the Iveco Daily, follow these steps: Turn on the Iveco Daily and ensure the service light is displayed on the dashboard…
How to Reset the Service Light on an Iveco Daily?
How to Reset the Service Light on an Iveco Daily?
IVECO Daily Today, let's learn how to reset the oil change service light on an Iveco Daily by following the instructions below. First, get inside the vehicle and…
How to Reset the Service Light on the Iveco Daily?
How to Reset the Service Light on the Iveco Daily?
IVECO Daily To reset the Service light on the Iveco Daily, press the accelerator pedal while the vehicle is completely off: while holding it down, turn the key i…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos