Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Iveco Daily?

Model: IVECO Daily MK 4 - Years 2006-2020
Part: Service warning light

The operation of resetting the Service light that is shown on the Iveco Daily dashboard can be done by turning the key to turn on the instrument panel, without starting the engine: once the dashboard has been activated, you will need to press the accelerator pedal and while holding it down, you will need to press the brake pedal eight times in a row. In this way, you will be able to release both pedals and turn off the instrument panel completely; the dashboard can then be turned on again by turning the key, and in this way you can verify that the light has disappeared.

Posted on 17 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Iveco Daily
How to reset the service light on the Iveco Daily
IVECO Daily (2014-2026 / MK 5) To reset the service light on the Iveco Daily, follow these steps: Turn on the Iveco Daily and ensure the service light is displayed on the dashboard…
How to Reset the Service Light on an Iveco Daily?
How to Reset the Service Light on an Iveco Daily?
IVECO Daily Today, let's learn how to reset the oil change service light on an Iveco Daily by following the instructions below. First, get inside the vehicle and…
How to Reset the Service Light on the Iveco Daily?
How to Reset the Service Light on the Iveco Daily?
IVECO Daily To reset the Service light on the Iveco Daily, press the accelerator pedal while the vehicle is completely off: while holding it down, turn the key i…

Other guides you may be interested in

What Does the "Code 60" Message Mean in the Opel Meriva?

If the "Code 60" message has appeared on the dashboard of your Opel Meriva, it means that the passenger side window is not calibrated correctly. This issue can arise, for example, after disconnecting or replacing the battery, as the control unit for the various devices will lose the stored data. To remove the warning from the dashboard, simply turn on the ignition, fully open the window, and then close it. This procedure is also valid for the driver's window if the "Code 59" message appears.

Watch the video!


by ScegliAuto

More videos