Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the timing belt on the Iveco Daily - Fiat Ducato 2.3 JTD

Model: IVECO Daily MK 3 - Years 1999-2006
Part: Timing belt

In today's video tutorial we will see the main instructions to remove and replace the timing belt on the Iveco Daily 2.3 Diesel, but also on the Fiat Ducato 2.3 JTD. The disassembly operation is carried out with the motor on a bench; then we start by removing the V-belt, loosening the pretensioner, and we remove the crankshaft pulley, unscrewing the central nut. At this point we remove the cover on the distribution side and take all the references necessary for disassembling the belt; we just have to replace it with the new one, following the video to the end!

Posted on 25 August 2021 by ScegliAuto

Video tutorial

Related tutorials

Iveco Daily timing belt replacement
Iveco Daily timing belt replacement
IVECO Daily In this guide we will see the steps that will show us how to disassemble and replace the timing belt of the Iveco Daily. First of all it is necessary…
Guide to replacing the timing belt of the Iveco Daily.
Guide to replacing the timing belt of the Iveco Daily.
IVECO Daily Today's guide will show us how to disassemble and replace the timing belt of the Iveco Daily, following the instructions below. To access the timing …
How do you replace the timing belt of the Iveco Daily?
How do you replace the timing belt of the Iveco Daily?
IVECO Daily The timing belt of the Iveco Daily can be replaced by opening the hood, in order to locate the components located inside the engine compartment: at t…

Other guides you may be interested in

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos