|
Do it yourself
| |||
| ||||
How to Replace the Auxiliary Belt on a Seat Ibiza 1.9 TDI
Model: Seat Ibiza
6J, 6P
- Years:
2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Video tutorial
Learn how to replace the auxiliary belt on a Seat Ibiza 1.9 TDI: you will need a long 16 mm socket, a locking pin, a jack, and axle stands to access from underneath, as well as a new auxiliary belt which can be found on auto-doc.it with code 6PK1210 for £13.39 + £9.95 shipping. For safety, disconnect the negative terminal of the battery, then remove the air hose and move the fuel filter without disconnecting the pipes. Lock the tensioner using the 16 mm socket to rotate the tensioner clockwise. Insert a pin into the two holes of the tensioner to lock it in the "relaxed" position. Remove the old belt by sliding it off the pulleys (starting from the alternator). To fit the new belt, follow the diagram usually printed in the user and maintenance manual; if you can't find it, take a photo of the belt before removing it. Place the belt on the crankshaft pulley from underneath, and route it over the alternator and power steering pump, leaving the tensioner for last. Rotate the tensioner again with the socket to loosen it and attach the belt. Remove the locking pin to check that the belt is centred on all pulleys. Start the engine and check for any squeaks or abnormal movements.
Posted on 7 March 2026 by ScegliAuto
Related tutorials
Seat Ibiza
(2002-2009 /
6L)
In this video, you will learn how to remove the Poly-V auxiliary belt from a Seat Ibiza. Open the bonnet and locate the belt (it is visible as it run…
Seat Ibiza
(2002-2009 /
6L)
Among the various periodic replacements to carry out on your vehicle, such as the Seat Ibiza 1.2 TDI, is the timing belt. The manufacturer specifies …
Seat Ibiza
(2002-2009 /
6L)
Start by unclipping and removing the upper engine cover of your Seat Ibiza. Once done, unclip and remove the cover for the auxiliary belt and timing …
Other guides you may be interested in
|
How to Reset the Tire Pressure Light on a MG ZS?
On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.140
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |