Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service in the Iveco Daily?

Model: IVECO Daily MK 4 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Warning light – error code

See other generations:
Video tutorial

Resetting the service on the Iveco Daily van is very simple; see how to do it in the attached video tutorial. This procedure should only be performed after completing the scheduled maintenance.

Start by turning on the instrument cluster, not the engine, and press the accelerator pedal fully down. Count to 15 seconds, and while still holding it down, press the brake pedal fully 10 times.

Once done, release both pedals, turn off, and then turn on the ignition again to check that the procedure has been successful.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

How to reset the Service light on the Iveco Daily?
How to reset the Service light on the Iveco Daily?
IVECO Daily To reset the Service light on the Iveco Daily, turn the key to switch on the instrument panel, confirming that the light is on. To reset it, press an…
How to reset the Service light on the Iveco Daily?
How to reset the Service light on the Iveco Daily?
IVECO Daily To reset the Service light on the Iveco Daily, turn the key to switch on the instrument panel and check that the light is illuminated. To reset it, p…
How to reset the service light on the Iveco Daily
How to reset the service light on the Iveco Daily
IVECO Daily (2014-2026 / MK 5) To reset the service light on the Iveco Daily, follow these steps: Turn on the Iveco Daily and ensure the service light is displayed on the dashboard…

Other guides you may be interested in

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos