Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. IVECO
    3. :
  3. Daily
    4. : How to solve the problem with the fan of an Iveco Daily?

IVECO Daily - Video tutorial

Model: IVECO Daily MK 5 - Years 2014-2023
Part: Fuse box
Operation: How to solve the problem with the fan of an Iveco Daily?

The cabin fan sometimes can suddenly stop working, also due to the related fuse that may have blown. Today, we will explain how to locate the fuse for the Iveco Daily's fan and replace it. The operation we are going to perform is very simple. The first thing to do is to open the engine compartment and locate the fuse box inside it; the box is located near the battery. Remove the cover and use the appropriate pliers to remove the fuse for the fan, which is number 15. The second thing to do is to insert a new fuse and turn on the car to verify that the fan has started working again.


Posted on 27 September 2023 by ScegliAuto



How to solve the EDC warning problem on the Iveco Daily
IVECO Daily (2006-2020 / MK 4) Today's information will show us how to solve the problem related to the EDC light of the Iveco Daily turning on. In many cases, the problem is cause
How to repair the non-functioning instrument panel of the Iveco Daily MK4.
IVECO Daily (2006-2020 / MK 4) In this video, we see how to solve the problem of the instrumentation of the Iveco Daily that does not seem to respond to the ignition through the ke
The engine of an Iveco Daily with starting problems.
IVECO Daily (1999-2006 / MK 3) In this video, we see an Iveco Daily MK3 version that sometimes has difficulty starting. No errors were found from the diagnostic outlets, so it is r

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos