Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the handbrake cable of the Iveco Daily?

Model: IVECO Daily MK 5 - Years 2014-2024
Part: Parking brake

In order to replace the handbrake cable, you need to access the underside of the vehicle, near the left rear wheel: here you will be able to locate the handbrake cable connected directly to the corresponding brake shoes. By loosening the bolt that secures these ends of the cable to the brake shoes, you will be able to disconnect it; the other end that needs to be loosened is located at the front of the vehicle. Once the old cable is completely removed from its housing, you can insert the new one by properly connecting its ends.

Posted on 29 February 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the Iveco Daily handbrake cable?
How to replace the Iveco Daily handbrake cable?
IVECO Daily (1999-2006 / MK 3) In order to replace the Iveco Daily handbrake cable, the vehicle must be raised so that the rear wheels are not in contact with the floor. Then it wi…
Where is the fuse box located on the Iveco Daily 2009?
IVECO Daily If you own a 2009 Iveco Daily and want to find out where the box containing all the various fuses of the vehicle is located, then all you have to do …
Where is the fuse box of the Iveco Daily 2007
IVECO Daily If you own an Iveco Daily MK2 (year 2007) and want to find out where the fuse box is located, just read our new mini guide carefully and put into pra…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos