Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the fuel filter of the Iveco Daily MK5

Model: IVECO Daily MK 5 - Years 2014-2026
Part: Diesel fuel filter

Periodically, we need to replace the diesel filter of the Iveco Daily to ensure that the fuel arrives clean at the fuel system. To do this, we open the front hood and under the cabin air intake we will find the filter to be changed. We start by removing the three electrical connectors, unscrewing the two bolts that secure the bracket holding the filter, unscrewing the filter body by hand and replacing it with a new one, which we will have previously filled with diesel to facilitate the pump's work at restart. We screw it in tightly. Tightening firmly, we put the filter body back on the bracket and secure it with the nuts, restore the electrical connections and activate the pump to restore the fuel flow.

Posted on 5 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Timing Belt on the Iveco Daily 2.3
Guide to Replacing the Timing Belt on the Iveco Daily 2.3
IVECO Daily (2014-2026 / MK 5) Below are the instructions for removing and replacing the timing belt on the Iveco Daily 2.3. First, open the bonnet and begin by removing the front …
Guide to replacing the timing chain of the Iveco Daily 3.0L
Guide to replacing the timing chain of the Iveco Daily 3.0L
IVECO Daily (2014-2026 / MK 5) Today we will see the useful instructions for disassembling and replacing the timing chain of the Iveco Daily 3.0L. First, we open the hood and start…
Fuse box diagram for an Iveco Daily
IVECO Daily Through this very short video tutorial, you can see the diagram of the main fuse box for an Iveco Daily, a model produced from 2000 to 2006. The diag…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos