Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlining of the Jaguar XF

Model: Jaguar Xf MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

See other generations:
Video tutorial

This guide will show you how to remove and replace the headlining or interior roof lining of the Jaguar XF. First, get inside the cabin and start removing the components fixed to the roof, including the sun visors, handles, and all the interior light fittings; disconnect the electrical connectors as shown in the video.

At this point, unclip the plastic pillars and pry off the lining to remove it, replacing it with the new one if necessary, following the video tutorial to the end!


Updated on 28 October 2026 by ScegliAuto


Related tutorials

How to Replace Interior Light Bulbs on Jaguar XF
How to Replace Interior Light Bulbs on Jaguar XF
Jaguar Xf (2008-2015 / MK 1) Is the interior light bulb on your Jaguar XF faulty? No problem, here’s how to remove the interior light. Pry between the light and the headlining pa…
Where is the Main Fuse Box of the Jaguar XF 2018?
Where is the Main Fuse Box of the Jaguar XF 2018?
Jaguar Xf (2015-2024 / X260, MK 2) In this new mini guide dedicated to your Jaguar XF second series (2015-2023), you will discover where the main fuse box is located. To find it, follo…
Where is the engine fuse box of the Jaguar XF located?
Where is the engine fuse box of the Jaguar XF located?
Jaguar Xf (2008-2015 / MK 1) To independently locate the engine fuse box of your first-generation Jaguar XF, you need to follow the steps described in this new guide. First of al…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos