Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Dismantling the Navigation CD Player

Model: Jaguar Xf MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Car stereo

See other generations:
Video tutorial

The navigation CD player unit is located in the rear boot on the left side (when looking inside the boot); once you open the reader compartment door, remove all the carpet lining from the side of the boot to access the reader itself (there may be some pressure clips to remove).

At this point, unscrew the mounting screws of the reader from the metal frame and pull it away from its housing, disconnect the connectors attached to it, and remove it completely.

The dismantling operation is therefore very simple and does not require any special tools.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Removing or Replacing the Radio with Display and Navigation
Removing or Replacing the Radio with Display and Navigation
Jaguar Xf (2008-2015 / MK 1) This guide shows how to remove or replace your radio with a display and navigation system. First, start by removing the gear cover, which is simply p…
Removing the Front Door Panel of a Jaguar XF
Removing the Front Door Panel of a Jaguar XF
Jaguar Xf (2008-2015 / MK 1) Today's main instructions will show you how to remove and replace the front door panel of a Jaguar XF. First, open the front door of your car and sta…
Replacing the Headlight Bulb on the Jaguar XF
Replacing the Headlight Bulb on the Jaguar XF
Jaguar Xf (2008-2015 / MK 1) The following steps will show you how to remove and replace the headlight bulb on the Jaguar XF, following the instructions below. First, open the en…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos