Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing or Replacing the Radio with Display and Navigation

Model: Jaguar Xf MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Car stereo

See other generations:
Video tutorial

This guide shows how to remove or replace your radio with a display and navigation system. First, start by removing the gear cover, which is simply pressed into place, using the appropriate tool.

Next, unscrew the screws beneath the ashtray and carefully extract it, being cautious of the cigarette lighter wire. Once the ashtray is removed, you will have access to two more screws that need to be unscrewed.

Finally, remove the cover around the hazard light switch and unscrew the screws underneath it. Once all screws are removed, you can proceed to extract the radio by gently pulling it towards you.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Replacing Car Wheel Bearings
Replacing Car Wheel Bearings
Jaguar Xf (2008-2015 / MK 1) The following guide shows how to change the wheel bearings on your car. The bearings, in this specific context, are spherical and relate to the car's…
Replacing the Car Fuel Filter
Replacing the Car Fuel Filter
Jaguar Xf (2008-2015 / MK 1) This guide shows how to replace your car's fuel filter. This operation will save you money as a clean fuel filter will lead to better fuel consumptio…
When to Change the Gearbox Oil in the Jaguar XF?
When to Change the Gearbox Oil in the Jaguar XF?
Jaguar Xf (2008-2015 / MK 1) Typically, the gearbox oil in a car, including a Jaguar, does not require replacement. However, it is necessary to check and, if needed, restore the …

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos