Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Car Wheel Bearings

Model: Jaguar Xf MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Bearing

See other generations:
Video tutorial

The following guide shows how to change the wheel bearings on your car. The bearings, in this specific context, are spherical and relate to the car's suspension, located on the drum or also called brake disc, which serves to reduce friction when the vehicle is in motion.

When replacing them, the car should be parked on a level surface.

Begin by loosening and then removing the wheel bolts, lifting the wheel with the help of a jack. Next, unscrew the bolts and remove the wheel, then remove the brake caliper using a socket or screwdriver.

Once the caliper is removed, take off the dust cover, also known as the metal or plastic cap, depending on the vehicle. After this, you can fit the new bearings.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Replacing the Car Fuel Filter
Replacing the Car Fuel Filter
Jaguar Xf (2008-2015 / MK 1) This guide shows how to replace your car's fuel filter. This operation will save you money as a clean fuel filter will lead to better fuel consumptio…
How to Replace the Front Bumper on a Jaguar XF
How to Replace the Front Bumper on a Jaguar XF
Jaguar Xf (2008-2015 / MK 1) Below, you will discover the procedure for removing and replacing the front bumper on a Jaguar XF. First, open the bonnet of the vehicle and start un…
Replacing a Car Door
Replacing a Car Door
Jaguar Xf (2008-2015 / MK 1) This guide shows how to replace a car door without necessarily relying on a specialised body shop and spending too much money. With a bit of willpowe…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos