Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bumper on a Jaguar XF

Model: Jaguar Xf MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Front bumper

See other generations:
Video tutorial

Below, you will discover the procedure for removing and replacing the front bumper on a Jaguar XF. First, open the bonnet of the vehicle and start unscrewing all the fixing screws found on the upper and lower parts of the bumper, removing the clips and plastic covers; unscrew the additional screws located on both sides of the front wheel arches, as shown in the video.

At this point, gently detach the bumper from the sides until it is completely removed, replacing it with a new one or repairing it; correctly install the front bumper!


Posted on 13 August 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil of the Jaguar XF?
How to Change the Engine Oil of the Jaguar XF?
Jaguar Xf (2008-2015 / MK 1) To change the engine oil of the Jaguar XF, lift the car with a jack to access the screws securing the front bumper after removing the right front whe…
How to Replace the Wiper Motor on a Jaguar XF?
How to Replace the Wiper Motor on a Jaguar XF?
Jaguar Xf (2008-2015 / MK 1) To replace the wiper motor on a Jaguar XF, open the bonnet to access the grille at the base of the windscreen. Here, loosen the screws securing the w…
How to Replace the Headlining of the Jaguar XF
How to Replace the Headlining of the Jaguar XF
Jaguar Xf (2008-2015 / MK 1) This guide will show you how to remove and replace the headlining or interior roof lining of the Jaguar XF. First, get inside the cabin and start rem…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos