Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Car Bumper Replacement

Model: Jaguar Xe MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Front bumper

Video tutorial

When replacing the bumper, to avoid wasting time and money, wear a pair of gloves to protect yourself from potential hazards. First, open the bonnet and secure it with the support rod. Once you locate the screws holding the bumper, unscrew them.

Also disconnect the fog light cables and the temperature sensor. At this point, proceed with the removal of the bumper.

Take the new bumper and position it in the front of the car, aligning the supporting structure with the bumper's screw holes.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Draining and Replacing Radiator Fluid
Draining and Replacing Radiator Fluid
Jaguar Xe (2015-2024 / MK 1) If the engine is overheating, this guide will show you how to drain the coolant. First, lift the car while observing all safety regulations. Next, on…
How to Replace the Key Fob Battery for a Jaguar XE
How to Replace the Key Fob Battery for a Jaguar XE
Jaguar Xe (2015-2024 / MK 1) Today, learn how to replace the battery in the key fob of a Jaguar XE produced from 2020 to 2022. The battery you need to purchase for the replacemen…
Instructions for Replacing the Fuel Filter
Instructions for Replacing the Fuel Filter
Jaguar Xe (2015-2024 / MK 1) The fuel filter of the vehicle in question is not located, as one would generally expect, in the engine bay, but is situated under the vehicle's floo…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos