Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Draining and Replacing Radiator Fluid

Model: Jaguar Xe MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Antifreeze coolant

Video tutorial

If the engine is overheating, this guide will show you how to drain the coolant. First, lift the car while observing all safety regulations.

Next, once the bonnet is open, remove the cap from the expansion tank of the cooling circuit to facilitate the fluid's exit. At this point, obtain a container and place it under the car, then unscrew the screw under the bumper through the opening shown in the video.

Once the fluid has drained, re-screw the screw and restore the fluid level, checking it again after running the engine to allow the fluid to fill the entire system. Car model: Jaguar X Type Year: 2001-2009.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

How to top up AdBlue in a Jaguar XE?
Jaguar Xe (2015-2024 / MK 1) In this tutorial, you will see how to top up AdBlue in a Jaguar XE, a very simple and quick operation to perform after the relevant warning light ill…
How to reset the AdBlue warning light in the Jaguar XE?
How to reset the AdBlue warning light in the Jaguar XE?
Jaguar Xe (2015-2024 / MK 1) If the AdBlue warning light in the instrument panel of our Jaguar XE comes on, it means that the pollution control system fluid has reached the minim…
Car Bumper Replacement
Car Bumper Replacement
Jaguar Xe (2015-2024 / MK 1) When replacing the bumper, to avoid wasting time and money, wear a pair of gloves to protect yourself from potential hazards. First, open the bonnet …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos