Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the AdBlue warning light in the Jaguar XE?

Model: Jaguar Xe MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: AdBlue warning light

Video tutorial

If the AdBlue warning light in the instrument panel of our Jaguar XE comes on, it means that the pollution control system fluid has reached the minimum level and, consequently, needs to be topped up. This is an extremely simple and quick operation, let's see how to proceed in this tutorial.

First of all, let's buy two urea canisters, then make sure the engine is turned off and open the trunk lid. Next, locate the cap on the left wall of the compartment, unscrew it, screw on the canister, and pour all the liquid inside.

Once the top-up is completed, it will still be necessary to perform a full recharge at a Jaguar dealership.


Posted on 27 October 2025 by ScegliAuto


Related tutorials

How to reset the AdBlue warning light on the Jaguar XE?
Jaguar Xe (2015-2024 / MK 1) To reset the AdBlue warning light on the Jaguar XE, you need to top up the additive liquid by adding the necessary amount to the tank; to do this, op…
How to top up AdBlue in a Jaguar XE?
Jaguar Xe (2015-2024 / MK 1) In this tutorial, you will see how to top up AdBlue in a Jaguar XE, a very simple and quick operation to perform after the relevant warning light ill…
How do you reset the tire pressure warning light on the Jaguar XE?
How do you reset the tire pressure warning light on the Jaguar XE?
Jaguar Xe (2015-2024 / MK 1) In order to reset the tire pressure warning light of the Jaguar XE, you need to inflate the tires until they are brought back to the correct pressure…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos