Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Fuel Filter

Model: Jaguar Xe MK 1 - Years 2015-2024
Part: Fuel filter

The fuel filter of the vehicle in question is not located, as one would generally expect, in the engine bay, but is situated under the vehicle's floor, near the right rear wheel (passenger side); therefore, it is advisable to place the car on suitable axle stands to facilitate access to the filter. Press on the locking tabs of the inlet and outlet pipes to disconnect them, loosen the clamp bolt securing the filter, and remove it from its housing. Insert the new filter, ensuring the correct fuel flow direction indicated by the arrow printed on the filter itself, secure it by tightening the clamp, and reconnect the pipes.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the cabin air filter for the Jaguar XE.
Replacement of the cabin air filter for the Jaguar XE.
Jaguar Xe (2015-2024 / MK 1) Below we will see the instructions that will allow us to replace the cabin air filter of the Jaguar XE. First, let's open the front passenger door an…
How to Replace the Cabin Filter on a Jaguar XE
How to Replace the Cabin Filter on a Jaguar XE
Jaguar Xe (2015-2024 / MK 1) In this video tutorial, you can see how to replace the cabin filter on a Jaguar XE by following some simple steps: first, purchase a new pollen filte…
Battery Replacement for the Jaguar XE
Battery Replacement for the Jaguar XE
Jaguar Xe (2015-2024 / MK 1) This guide provides instructions for removing and replacing the battery in the Jaguar XE. First, open the boot lid and start by removing the floor pa…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos