Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of the Jaguar XF?

Model: Jaguar Xf MK 1 - Years 2008-2015
Part: Engine oil

To change the engine oil of the Jaguar XF, lift the car with a jack to access the screws securing the front bumper after removing the right front wheel. Once these components are removed, locate the oil drain plug, which must be unscrewed to allow the oil to flow into a container. After the oil has drained, close the plug and open the bonnet: in the engine bay, locate the filter that needs to be removed and replaced with a new one; there will also be a filler from which to top up with new oil.

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Automatic Transmission Oil on the Jaguar XF
How to Change the Automatic Transmission Oil on the Jaguar XF
Jaguar Xf (2008-2015 / MK 1) This guide outlines the steps to service the automatic gearbox by replacing the transmission oil on the Jaguar XF. First, lift the vehicle and begin …
How to reset the service light on a 2012 Jaguar XF
How to reset the service light on a 2012 Jaguar XF
Jaguar Xf (2008-2015 / MK 1) Today we will explain how to reset the service light, related to the car service on a 2012 Jaguar XF model, independently. To reset the light after r…
How to replace the timing belt on the Jaguar XF?
How to replace the timing belt on the Jaguar XF?
Jaguar Xf (2008-2015 / MK 1) To replace the timing belt on the Jaguar XF, open the bonnet to access the components located in the engine bay: at the front of the engine block, yo…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos