|
Do it yourself
| |||
| ||||
When to Change the Gearbox Oil in the Jaguar XF?
Model: Jaguar Xf
MK 1
- Years:
2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Video tutorial
Typically, the gearbox oil in a car, including a Jaguar, does not require replacement. However, it is necessary to check and, if needed, restore the level, which generally occurs every 4 years. Replacement only happens if the mechanic deems it necessary during the inspection. For automatic gearboxes, replacement is generally recommended every 50,000 miles unless otherwise indicated by the manufacturer in the service booklet. Here’s how to perform the operation. First, disconnect and remove the battery. Below, you will find the gearbox and the sealed hole through which you can replace the oil. Remove the cap and insert a tube. Now, lift the car on the side you are working on. Locate the hole beneath the gearbox that is used to drain the old oil and unscrew the bolt after placing a container underneath. At this point, clean the gearbox by flushing a special fluid from the upper hole to the drain hole several times, usually 4 times, until clear fluid flows from the drain. Then, close the drain hole and you can pour in the new oil. The maintenance operation shown in the images is performed on a Jaguar type X.
Updated on 22 February 2026 by ScegliAuto
Related tutorials
Jaguar Xf
(2008-2015 /
MK 1)
This guide outlines the steps to service the automatic gearbox by replacing the transmission oil on the Jaguar XF. First, lift the vehicle and begin …
Jaguar Xf
(2008-2015 /
MK 1)
To change the engine oil of the Jaguar XF, lift the car with a jack to access the screws securing the front bumper after removing the right front whe…
Jaguar Xf
(2008-2015 /
MK 1)
Here’s how to unlock the automatic gearbox of the Jaguar XF: remove the cover plate located between the armrest and the cup holder by simply prising …
Other guides you may be interested in |
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.047
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |