Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper on a Jaguar X Type

Model: Jaguar X-Type MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Front bumper

Video tutorial

Locate the five screws under the car that hold the bumper in place (three central and two lateral). Apply plenty of penetrating oil (or similar) and unscrew them.

Remove the now free protections. At this point, you will see the other screws that secure the bumper to the grille.

Raise the bonnet of your Jaguar and secure it. Disconnect the indicators, headlights, and fog lights, and unscrew the wheel arch liner so you can move it and access the side pins of the bumper that keep it attached to the car. Remove them and with a bit of force, the bumper will detach.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

How to Connect Your Smartphone to the Bluetooth of a Jaguar X-Type
How to Connect Your Smartphone to the Bluetooth of a Jaguar X-Type
Jaguar X-Type (2001-2009 / MK 1) Before you can begin, sit in the driver's seat of your Jaguar X-Type. Start by activating the car radio, and then enable Bluetooth on your smartphone…
How to Replace the Key Fob Battery on Jaguar X-type and S-type
How to Replace the Key Fob Battery on Jaguar X-type and S-type
Jaguar X-Type (2001-2009 / MK 1) Today, you will learn how to disassemble and replace the battery in the key fob for a Jaguar X-type, as well as the S-type. First, take your key fob …
Where to find the fuse box on the Jaguar X-Type
Where to find the fuse box on the Jaguar X-Type
Jaguar X-Type (2001-2009 / MK 1) If you own a Jaguar X-Type and want to find out where the fuse box is located, follow these steps: First, ensure the car is parked safely and complet…

Other guides you may be interested in

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos