Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Wheel Bearing on a Jaguar S Type

Model: Jaguar S-Type MK 1 - Years 1999-2008
Part: Bearing

After removing the wheel, caliper support, and brake disc: completely detach the wheel hub from the car's arm, unscrew the bolts where the wheel fits. Extract the worn bearing. Using a pressing tool, install the new bearing. Before reassembling everything, clean all dirt and debris from the disassembled parts with brushes and lubricate the components. Install the brake disc with all attached bolts, tighten the caliper support to the disc and the pads, then mount the brake caliper, ensuring all bolts are securely tightened. Finally, fit the wheel with the associated bolts.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Jaguar S-Type?
How do you reset the Service light on the Jaguar S-Type?
Jaguar S-Type (1999-2008 / MK 1) In order to reset the Service light of the Jaguar S-Type, you need to turn on the instrument panel by inserting the ignition key into the correspondi…
How to replace the front windshield wipers of the Jaguar S-Type
How to replace the front windshield wipers of the Jaguar S-Type
Jaguar S-Type (1999-2008 / MK 1) These short and simple steps will show us how to disassemble and replace the front wipers of the Jaguar S-Type. First, lift the arm of the front wipe…
Position and Fuse Diagram on Jaguar S-Type
Jaguar S-Type (1999-2008 / MK 1) The Jaguar S-Type has three fuse boxes, all located on the right side: the first is typically found under the bonnet, specifically at the outer part …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos