Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Jeep Renegade
    4. : Rear window

Jeep Renegade - Rear window

Rear Window Jeep Renegade (2014-2026 / mk 1, bu, 520)

Jeep Renegade (2014-2026 / MK 1, BU, 520)
How to Replace the Rear Wiper on a Jeep Renegade
To replace the rear wiper on a Jeep Renegade, lift the wiper arm from the rear window until it is in the working position. Locate the wiper blade fastening …Read all…
Posted on 22 May 2026 by ScegliAuto
Cigarette lighter (1) Airbag (9) Speaker (7) Air conditioning (2) Car stereo (14) Roof rack bars (1) Battery (10) Ignition coil (1) Air vents (2) Grille (1) Transmission (4) Body (8) Control unit (1) Key (45) Timing belt (5) V-belt (2) Onboard computer (15) Checks and maintenance (37) Oil pan (1) Dashboard (2) Brake rotors (1) Side marker light (1) Headlight (3) Tail light (7) Fog lights (7) Air filter (10) Cabin air filter (26) Fuel filter (1) Diesel fuel filter (2) Oil filter (6) Parking brake (9) Grille (3) Window switch (2) Light bulb (10) Side marker bulb (6) Headlight bulb (14) Tail light bulb (8) Interior dome light bulb (2) Instrument panel light (1) License plate light (9) (1) Rear window (1) Handle (3) Engine (1) Power window motor (1) Starter motor (1) Transmission fluid (3) Engine oil (12) Clock (9) Door trim panel (9) Front bumper (3) Rear bumper (2) Brake pads (3) Tires (3) Shift knob (3) Fuel pump (1) Car door (2) Instrument cluster (4) Wheel (1) Fuse box (16) Seat (1) Parking sensors (5) Door lock (1) Oxygen sensor (2) Side mirror (9) AdBlue warning light (1) Warning light – error code (16) (1) Tire pressure warning light (31) Service warning light (98) Fuel cap (7) Windshield wipers (5) Steering wheel (2)

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos