Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Jeep Renegade
    4. : Light bulb

Jeep Renegade - Light bulb

Jeep Renegade (2014-2023 / 520, BU, MK 1)
How to replace glove box bulb in Jeep Renegade?
In this tutorial we can see how to replace the glove box bulb in your Jeep Renegade, a very simple and fast operation. First of all, position ourselves on the …read all…
Posted on 25 December 2022 by ScegliAuto
Jeep Renegade (2014-2021 / )
How do you replace the courtesy lights of the Jeep Renegade?
To be able to replace the courtesy lights of the Jeep Renegade you need to use a flat screwdriver to be able to detach the entire panel that is located behind …read all…
Posted on 29 July 2022 by ScegliAuto
Jeep Renegade (2014-2021 / )
How do you replace the halogen bulb with the LED one on the Jeep Renegade?
In order to replace the original Jeep Renegade halogen bulbs with new LED bulbs, you must first open the hood and access the rear part of the headlight …read all…
Posted on 4 July 2022 by ScegliAuto
Jeep Renegade (2014-2021 / )
How to replace the sidelights in the Jeep Renegade?
Replacing the daytime running lights in the Jeep Renegade is a very quick and easy operation that does not require intervention in the workshop. All you need …read all…
Posted on 28 April 2024 by ScegliAuto
Jeep Renegade (2014-2023 / 520, BU, MK 1)
How to replace the rear parking light bulbs on the Jeep Renegade?
In order to replace the rear position light bulbs, but also the brake and turn signal bulbs, you need to open the tailgate of the luggage compartment and …read all…
Posted on 13 March 2024 by ScegliAuto
Jeep Renegade (2014-2023 / 520, BU, MK 1)
How to replace the headlight bulb on the Jeep Renegade?
In order to replace the headlight bulbs of the Jeep Renegade, you need to open the hood to access the engine compartment and remove the circular cover from the …read all…
Posted on 13 March 2024 by ScegliAuto
Jeep Renegade (2014-2023 / 520, BU, MK 1)
How to replace the low beam on Jeep Renegade?
When one of the bulbs in the Jeep Renegade is burned out, you can take your car to an electrician to have it replaced, but if you want to save some money, you …read all…
Posted on 7 February 2024 by ScegliAuto
Jeep Renegade (2014-2023 / 520, BU, MK 1)
Changing the headlight bulbs on a Jeep Renegade
Do you want to change the headlight bulbs on a Jeep Renegade? Let's see how to proceed in the video guide. We open the bonnet by pulling the lever located at …read all…
Posted on 11 October 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (7) Loudspeaker (5) Car stereo (9) Roof Rack Bars (1) Battery (12) Air Vents (2) Gearbox (3) Bodywork (5) Control unit (1) Key (29) Timing belt (3) -board computer (18) Checks and maintenance (88) Brake discs (1) Side indicator light (1) Headlight (2) Tail light (6) Fog lights (7) Air filter (7) Cabin air filter (19) Petrol filter (1) Diesel filter (1) Oil filter (5) Hand brake (4) Grille (2) Window lift switch (1) Accessory Kit (1) Light bulb (8) Side turn signal light bulb (6) Headlight bulb (11) Rear light bulb (6) Interior lights ceiling light bulb (2) Dashboard light (1) License plate light (7) Handle (2) Window motor (1) Starter motor (1) Gear oil (3) Engine oil (15) Door panel (8) Front bumper (3) Rear bumper (2) Brake pads (3) Tires (4) Gear Shift Knob (2) Door (2) Instrument cluster (21) Wheel (1) Fuse box (5) Seat (1) Parking sensors (5) Lock (2) Lambda sensor (1) Outside rearview mirror (8) Windscreen wipers (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos